-
Clear Cylinder Honing Oil | 1 or 5 Gallons
from $38.99Goodson Clear Honing Oil helps keep honing stones clean and free-cutting. This aggressive formulation is ideal for portable hones and all makes of automotive honing machines. Goodson Honing Oil mixes readily with other brands, including Sunnen® and it is NOT... -
Replacement Guide Pins for Piston Pin Removal Fixture (PPE-7082)
from $41.99Use Guide Pins for piston installation. Choose from 8 sizes to fit most popular engines with pin diameters of 0.859" to 1.087". -
Rod Hone Filter Mats | 3 Sizes
from $20.99These 1" thick filter mats are 100% synthetic. They trap abrasive particles and metal filings before they can enter the storage tank on your hone. Also cushions parts to prevent damage. Simply replace when clogged. 3 Sizes to choose from.... -
30º Sioux-Style General Purpose Valve Seat Stones
from $14.99We use brass bushing to resist galling or seizing to the holder Heat-cured, permanent epoxy bonding prevents loose bushings Our bushings are deep set to expose the most abrasive for long life Each wheel is pre-trued and checked to assure... -
Ring Compressor Band | 3.625" - 3.875" | GPS-98E
$18.99Use this Piston Ring Compression Band with Compression Pliers to install piston rings safely and easily. Made of hardened steel for durability. Fits rings in range of 3.625" to 3.875". -
Ring Compressor Band | 3.125" - 3.375" | GPS-98C
$18.99Use this Piston Ring Compression Band with Compression Pliers to install piston rings safely and easily. Made of hardened steel for durability. Fits rings in range of 3.125" to 3.375". -
Oil Filter Inspection Tool | FIT-1-G
$94.99Use the Goodson Oil Filter Inspection Tool to find troubleshoot engine problems with every oil change. By using the Oil Filter Inspection Tool, you can easily cut open any oil filter to inspect the paper cartridge to see what has... -
150 Grit Sunnen Honing Stones | 2.5 - 3.3" Range | GY25-J45
$82.56Special stones for ported cylinders. These specially designed stones from Sunnen allow the hone to pass the intake and exhaust ports while maintaining consistent pressure to remove material accurately and easily. Fits range from 2.5 to 3.3". Give a 45Ra... -
45º Sioux-Style Finishing Valve Seat Stones
from $15.99We use brass bushing to resist galling or seizing to the holder Heat-cured, permanent epoxy bonding prevents loose bushings Our bushings are deep set to expose the most abrasive for long life Each wheel is pre-trued and checked to assure... -
Ring Compressor Band | 3.875" - 4.125" | GPS-98F
$18.99Use this Piston Ring Compression Band with Compression Pliers to install piston rings safely and easily. Made of hardened steel for durability. Fits rings in range of 3.875" to 4.125". -
Ring Compressor Band | 1.875" - 2.125" | GPS-98Q
$18.99Use this Piston Ring Compression Band with Compression Pliers to install piston rings safely and easily. Made of hardened steel for durability. Fits rings in range of 1.875" to 2.125". -
80-Grit Silicon-Carbide Cylinder Head Resurfacing Belts
from $35.01These good quality black Silicon-Carbide Cylinder Head Resurfacing Belts are designed specifically to resurface aluminum. Down pressure is not recommended. SGA-10-87 fits Rogers SB-1028, SF-1028, T&S Machines, Master Tool 1029 SGA-11-76 fits Winona Van Norman BG-600 SGA-11-79 fits RMC, Peterson RG-1203... -
Diamond Dresser Tool | G-4
$54.991/2" x 3-1/4" 20NF Thread 1/5 carat Fits Kwik-Way, Valve Master (1714) Valve Refacers, Kwik-Way Valve Seat Grinders and Storm Vulcan No. 65 Rod Grinder -
240 Grit Standard Duty Flex-Hones
$27.99All sizes are 8" OAL Silicon-Carbide Abrasive Ideal for valve guides and small diameter ports -
Ultrafinish Plateau Soft Hones
from $13.99Choose from multiple sizes of Ultra-Finish Plateau Soft Hones for portable drills; listed smallest to largest below. Remove microscopic peaks and scuffs without enlarging bores Use with a portable drill Abrasive impregnated nylon bristles Ideal for high performance engine building... -
Rod Honing Oil
from $59.99Keeps stones clean and free-cutting during rod reconditioning, pin fitting and other honing applications Includes additives for high pressure cutting Will mix with other honing oils View the Rod Honing Oil Safety Data Sheet -
Ring Compressor Band | 2.875" - 3.125" | GPS-98B
$18.99Use with the Piston Ring Band Ring Compression Pliers to install piston rings safely and easily. Hardened steel for durability. Range: 2.875" to 3.125" -
Feeler Gauge Kit | FE-KIT
$57.99Use to measure piston-to-wall clearance when honing, to find ring end gap & to check cylinder heads with a straight-edge. Individual sizes also available. -
IEO-80 : Block Organizer Trays
$71.99Small Block measures: 24-1/4" x 25-1/2" x 1-1/2"D Store pistons, rods, lifters, push rods and camshafts Formed compartments keep engine components securely in place NOTE: Due to the size of this item, dimensional shipping rates apply. -
Sunnen Felt Set | 3.3"-4.2" Range | MM33-FO5
$112.17Use these felt "stones" to lap high silicon aluminum alloy cylinders. Apply a coat of Sunnen Silicon-Compound (AN-30) to the felt and the cylinder surface. When finished, the cylinder will have a matte finish. Pistons and rings will ride on...
1-800-533-8010 | 507-452-1830
156 Galewski Dr. | Winona, MN 55987
