Home → Search: 13 results found for "Swedge"
  1. Brake Drum Swedge Cutting Tool

    Brake Drum Swedge Cutting Tool

    $119.99
    This hard-to-find tool cuts wheel stud swedges to remove and replace pressed-in wheel studs. For 1/2" studs. Carbide tipped. Use with a drill press or mill.
  2. Wedges & Wedge Plates for Sunnen CR-Mandrels

    Wedges & Wedge Plates for Sunnen CR-Mandrels

    from $65.42
    Use to raise the stones.
  3. Sunnen Standard Lifter Bore Mandrel Wedge

    Sunnen Standard Lifter Bore Mandrel Wedge

    $118.47
    Fits both 6.00" Mandrels. Short reach is recommended for greater precision with Small Block Chevy and Ford
  4. NCB-266 : Neway Wedge for 1in. and smaller bodies

    Neway Wedge for 1in. and smaller bodies | NCB-266

    $2.49
    Use this alignment wedge with the NCB-260 flat head screw to hold cutter blades firmly in the proper position.
  5. NCB-265 : Neway Wedge for bodies over 1 in.

    Neway Wedge for bodies over 1 in. | NCB-265

    $2.49
    Use this Neway Wedge with the NCB-260 flat screw to hold cutter blades in proper alignment.
  6. Sunnen Logo

    Bushing Expander Mandrel

    $610.02
    For expanding new bushings in rods - provides another use for your Sunnen Honing Machine. Assures 100% contact for perfect heat transfer Additional protection for your pin fit Squeezes bushing into every hole irregularity Swedges bushings in minutes Must be...

  7. 74-6443 | QualCast Push Rod

    $3.69
    Heat treated chrome moly with additional black oxide finish suitable for use with guide plates.Length: 8.680" | OD: 3/8 x .060 | Type: Swedged | Tip 1: Type O | Tip 2: Type OApplications: GM

  8. 74-6441 | QualCast Push Rod

    $5.16
    Heat treated chrome moly with additional black oxide finish suitable for use with guide plates.Length: 8.281" | OD: 3/86 x .060 | Type: Swedged | Tip 1: Type O | Tip 2: Type OApplications: GM Big Block Intake

  9. 74-6445 | QualCast Push Rod

    $3.45
    Heat treated chrome moly with additional black oxide finish suitable for use with guide plates.Length: 7.70" | OD: 5/16 x .075 | Type: Swedged | Tip 1: Type O | Tip 2: Type OApplications: FOR

  10. 74-6442 | QualCast Push Rod

    $4.71
    Heat treated chrome moly with additional black oxide finish suitable for use with guide plates.Length: 9.254" | OD: 3/86 x .060 | Type: Swedged | Tip 1: Type O | Tip 2: Type OApplications: GM Big Block Exhaust
  11. NCB-260 : Flat Head Screw for Neway

    Flat Head Screw for Neway | NCB-260

    $2.49
    Use with Neway NCB-265 and NCB-266 wedges to hold cutter blades at the proper angle and height.

  12. 30-6897H | Valve Guide

    $4.07
    Specifications:  Material: Cast Iron Length: 2.188 Inside Diameter: 0.3120 Outside Diameter: 0.4390 Type: 1-SR Applications:  Chrysler: Year 1963, 300 model with 426 C.I. Hemi And Wedge Vin J, R 16V Engine Chrysler: Year 1963, New Yorker model with426 C.I. Hemi And...
  13. AAY20869BH6LH : 6.0

    Sunnen Lifter Bore Mandrel | 6.0" Reach | .869"-.900" Range

    $649.98
    Use the Standard Size Sunnen Lifter Bore Honing System to restore bores and finish after shot blasting GM and Ford V-Blocks. This model has a 6" reach. This Sunnen Lifter Bore Mandrels is part of the Lifter Bore Honing system...