Goodson Gazette
Counterbore Cutting, Part 2 | Tech Lab Tuesday
In this episode of Tech Lab Tuesday, Dave Monyhan continues his explanation and demonstration of Adjustable Counterbore Cutters. First there's a recap of how to set-up an adjustable counterbore cutter then Dave moves to the Seat & Guide Machine to show how to use the tooling.
Products Used In This Video:
Counterbore Cutting, Part 1 | Tech Lab Tuesday Video
This is the first of a two-part Tech Lab Tuesday series on Counterboring, Valve Seat Counterboring to be exact. In this video, Dave Monyhan discusses the various forms counterboring tools have taken over the years, including Brazed Carbide, Indexable, and finally the Adjustable Indexable Counterbore Cutting Tool from Goodson. You'll learn how to set cutter size and much more in this episode of Tech Lab Tuesday.
Products Used In This Video
On The Level About Levels | Tech Lab Tuesday
This episode of Tech Lab Tuesday is all about leveling - specifically using the Goodson Valve Guide Level. Dave Monyhan returns to explain how to calibrate the level, then how to level the machine to the level and finally how to level the workpiece to the level and the leveled machine.
Products Used In This Video:
- Valve Guide Level (VGL-100)
- High Speed Steel Core Drill/Reamers
Valve Spring Compressors | Tech Lab Tuesday Video
In this Tech Lab Tuesday episode, Dave Monyhan (retired) takes us on a tour of the manual and pneumatic Valve Spring Compressors in the Goodson product line.
Products Used In This Video:
- Standard Manual Valve Spring Compressor (CF-1500)
- Heavy Duty Manual Valve Spring Compressor (CF-1300)
- Adjustable Pneumatic Valve Spring Compressor (CF-2002)
- Diesel Adjustable Pneumatic Valve Spring Compressor (CF-2008)
- Two-Stage Pneumatic Valve Spring Compressor (GSC-1000)
You Might Also Like
Extending Single Piece Resurfacing Wheel Life
The most common cause of failure we hear about in resurfacing wheels is plate separation. To prevent plate separation, we must first know what causes it. So here goes:
- A warped mounting flange
- Incomplete cleaning of the mounting flange
- Weak coolant
- Improperly mounting the wheel in the machine
Valve Lapping Tools & Techniques | Tech Lab Tuesday Video
In this episode of Tech Lab Tuesday, Goodson's own Dave Monyhan talks about lapping as in Valve Lapping. Not only does he explain how lapping works and why you would want to lap your valves, he demonstrates several of the lapping tools available.
Tools & Supplies Used In This Video:
Valve Spring Testing | Tech Lab Tuesday Video
This episode of Tech Lab Tuesday is all about Valve Spring Testers. Get information on why to test springs, how to test them and the differences between the Goodson Analog Spring Tester (VST-60G) and the Intercomp Digital Spring Tester (VST-2000).
Products Mentioned In This Video:
A Not So Technical Tech Lab Tuesday Video
Sit back and enjoy the antics and out-takes that don't make it to the finished videos.
Valve & Seat Concentricity | Tech Lab Tuesday Video
Concentricity is an essential when building or rebuilding an engine. If your seats aren't concentric to the valve stem or your valve stem isn't concentric to the valve face your engine won't perform properly.
In this episode of Tech Lab Tuesday, Dave Monyhan demonstrates how to measure concentricity. After all, if you're not measuring you're just guessing!
Products Used in This Video
- Valve Stem Concentricity Gauge (VCG-16)
- Premium Valve Seat Run-Out Gauges (VSG-375, VSG-385 & VSG-375XL)
- Precision Valve Seat Run-Out Gauge (SCG-375)
As always, if you have any questions about the topics or tools in this video or any other tech question, feel free to contact the Goodson Techxperts™ by email or phone (1-800-533-8010).